Runyu Zhang, Christopher Paniagua, Pooyan Javadzadeh, Ning Bian, Huiluo Chen, Yao Ren & Hongbing Lu, The Incipient Failure of Glass Beads and Glass Bead/Epoxy Composites Under Compression as Observed by In Situ X-Ray Micro-Computed Tomography
DR Martel, DY Dapaah, T Willett, AC Laing, Predictors of Femoral Neck Bone Fracture Toughness and Strength Under High-Rate Impact Loading
Omar Mireles, Ryan Wilkerson, Francisco Medina and Edel Arrieta, Additive Manufacture of Porous ZrC for NTP In-Core Insulators
Ru Yang, Yang Li, Danielle Zeng, and Ping Guo, Deep DIC: Deep Learning-Based Digital Image Correlation for End-to-End Displacement and Strain Measurement
Zilin Jiang,Kornel F. Ehmann,Jian Cao , Prediction of forming temperature in electrically-assisted double-sided incremental forming using a neural network
Thakur, Mohmad Mohsin, Towards Modeling Projectile Penetration in Dry and Multiphase Granular Materials.
K. M. Conway & G. J. Pataky, Aramid Fiber Surface Area Impact on Elastomer Crack Growth
C.K. Cocke, H. Mirmohammad, M. Zecevic, B.R. Phung, R.A. Lebensohn, O.T. Kingstedt, A.D. Spear, Implementation and experimental validation of nonlocal damage in a large-strain elasto-viscoplastic FFT-based framework for predicting ductile fracture in 3D polycrystalline materials, International Journal of Plasticity
Runyu Zhang, Yuxin Jiao, Christopher Paniagua, Yi Tian, Hongbing Lu, and Wei Li, The Failure of Wire-Arc Additive Manufactured Aluminum Alloys With Porosities Under Loadings as Observed by In-Situ X-Ray Micro-Computed Tomography
Pun, Lalit, Guilherme Corrêa Soares, Suprit Bhusare, Matti Isakov, and Mikko Hokka, Microscale Strain Localizations and Strain-Induced Martensitic Phase Transformation in Austenitic Steel 301LN at Different Strain Rates
Zachary Stephen Courtright, Rapid Process Development of Aerospace Alloys Using Small Punch Test
Runyu Zhang, Wei Li, Yuxin Jiao, Christopher Paniagua, Yao Ren, Hongbing Lu, Porosity evolution under increasing tension in wire-arc additively manufactured aluminum using in-situ micro-computed tomography and convolutional neural network
Cigdem Caglayan, Genwoo Kim, Gun Jin Yun, CNT-Reinforced Self-Healable Epoxy Dynamic Networks Based on Disulfide Bond Exchange
Li, JL., Zhao, GF., Further Development of Digital Image Correlation (DIC) to Measure the Discontinuous Deformation of Rock on Small-Scale Tests
Sieverts, M., Obata, Y., Rosenberg, J.L. et al. , Unraveling the effect of collagen damage on bone fracture using in situ synchrotron microtomography with deep learning
Adi Aharonov, Haim S. Mordechai, Smadar E. Sharon and Mirit Sharabi, The mechanical behavior of silk-fibroin reinforced alginate hydrogel biocomposites – Toward functional tissue biomimetics
Dolev Frenkel, Eran Ginsbury and Mirit Sharabi, The Mechanics of Bioinspired Stiff-to-Compliant Multi-Material 3D-Printed Interfaces
Ru Yang, Yang Li, Danielle Zeng, and Ping Guo, Deep DIC: Deep Learning-Based Digital Image Correlation for End-to-End Displacement and Strain Measurement
Omar Mireles, Ryan Wilkerson, Francisco Medina and Edel Arrieta, Additive Manufacture of Porous ZrC for NTP In-Core Insulators
DR Martel, DY Dapaah, T Willett, AC Laing, Predictors of Femoral Neck Bone Fracture Toughness and Strength Under High-Rate Impact Loading
Hadi Mirmohammad, SEM 3rd Place Winner, In-Situ Full-Field Strain Measurement at the Sub-grain Scale Using the Scanning Electron Microscope Grid Method
Runyu Zhang, Huiluo Chen, Sadeq Malakooti, Simon Oman, Bing Wang, Hongbing Lu, Huiyang Luo, Quasi-Static and Dynamic Confined Compressive Behavior of Glass Beads by In-Situ X-Ray Micro-Computed Tomography
MehdiShishehbor, HyeyoungSon, MdNuruddin, Jeffrey P.Youngblood, ChelseaDavis, Pablo D.Zavattieri, Influence of alignment and microstructure features on the mechanical properties and failure mechanisms of cellulose nanocrystals (CNC) films
Dibakar Mondal, Thomas L Willett, Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials
Shabanisamghabady, Mitra, Dislocation Slip and Deformation Twinning in Face Centered Cubic Low Stacking Fault Energy High Entropy Alloys (2020). All Dissertations. 2756.
Mitchell L. Rencheck, Andrew J. Weiss, Sami M. El Awad Azrak, Endrina S. Forti, Md. Nuruddin, Jeffrey P. Youngblood, and Chelsea S. Davis* ACS-Applied Polymer Materials (ACS Appl. Polym. Mater. 2020, 2, 578−584), Nanocellulose Film Modulus Determination via Buckling Mechanics Approaches
O Mireles, Z Jones, O Rodriguez, M Ienina – AIAA Propulsion and Energy 2020 Forum, 2020, Development of Additive Manufactured Ultra-Fine Lattice Structures Propulsion Catalyst
O Mireles, O Rodriguez, Y Gao, N Philips – AIAA Propulsion and Energy 2020 Forum, 2020, Additive Manufacture of Refractory Alloy C103 for Propulsion Applications
Mirmohammad, H., Gunn, T. & Kingstedt, O.T.- Experimental Techniques, 2020, In-Situ Full-Field Strain Measurement at the Sub-grain Scale Using the Scanning Electron Microscope Grid Method
Tomas Webbe Kerekes- Enhancement of Mechanoluminescence Sensitivity of SrAl2O4: Eu2+, Dy3+ Composite by Ultrasonic Curing Method
Dibakar Mondal & Thomas Willett, Mechanical properties of nanocomposite biomaterials improved by extrusion during direct ink writing
Mohmad Moshin Thakur & Dayakar Penumadu, Triaxial compression in sands using FDEM and micro-X-ray computed tomography
X Zhang, M Li, JS Park, P Kenesei, JD Almer, In-situ High-energy X-ray Study of Deformation Mechanisms in Additively Manufactured 316 Stainless Steel
M Li, X Zhang, JD Almer, JS Park, P Kenesei – 2019 Final Report on Investigating Grain Dynamics in Irradiated Materials with High-Energy X-rays
Vieira de Mattos, D.F., Huang, R. & Liechti, K.M. The effect of moisture on the nonlinearly viscoelastic behavior of an epoxy. Mech Time-Depend Mater (2020)
Rencheck, M. L., Rodriguez, R. , Miller, N. A. and Davis, C. S. , A buckling mechanics approach to elastic modulus determination of glassy polymer films. Polym. Sci. Part B: Polym. Phys.. . doi:10.1002/polb.24755
Raja, S. N., Ye, X., Jones, M. R., Lin, L., Govindjee, S., & Ritchie, R. O. (2018). Microscopic mechanisms of deformation transfer in high dynamic range branched nanoparticle deformation sensors. Nature communications, 9(1), 1155.
Adams, D., & Turner, C. J. (2018). An implicit slicing method for additive manufacturing processes. Virtual and Physical Prototyping, 13(1), 2-7.
Cline, J., Wu, V., & Moy, P. (2018). Assessment of the Tensile Properties for Single Fibers (No. ARL-TR-8299). US Army Research Laboratory Aberdeen Proving Ground United States.